Click to enlarge

Glove Juba - HMT160 POWER CUT Cartoncillo

chevron_left
navigate_next

Glove Juba - HMT160 POWER CUT

Name: HMT160
Brand: Juba

Goat leather glove with palm reinforcement and elastic cuff. Chainsaw cut protection on the back, left hand only

Normative

2123X

EN388:2016 Protective gloves against mechanical risks.
The EN388: 2003 standard is renamed EN388: 2016, the year of its revision. The reason for the modification is given by the discrepancies in the results between laboratories in the knife cut test, COUP TEST. Materials with high levels of cut produce a dulling effect on the circular blades, which undermines the result.

The new regulation was published in November 2016 and the previous one is from the year 2003. During these 13 years, there has been a great innovation in the materials for the manufacture of cutting gloves, they have forced to introduce changes in the tests to be able to measure with more rigorous levels of protection.

pictograma 388 pictograma 388A1

A - Abrasion resistance (X, 0, 1, 2, 3, 4)
B - Blade Cut Resistance (X, 0, 1, 2, 3, 4, 5)
C - Tear resistance (X, 0, 1, 2, 3, 4)
D - Puncture resistance (X, 0, 1, 2, 3, 4)
E - Cutting by sharp objects ISO 13997 (A, B, C, D, E, F)
F - Impact test complies / does not comply (It is optional. If it complies, put P)

EN388:2016 PERFORMANCE LEVELS	1	2	3	4	5
6.1 Abrasion resistance (Cycles)	100	500	2000	8000	-
6.2 Blade cut resistance (Index)	1,2	2,5	5	10	20
6.4 Tear resistance (Newtons)	10	25	50	75	-
6.5 Puncture resistance (Newtons)	20	60	100	150	-

ENISO13997:1999 PERFORMANCE LEVELS	A	B	C	D	E	F
6.3 TDM: Cut resistance (Newtons)	2	5	10	15	22	30

Clase 1 / Diseño A / Tipo 2

The minimum levels required for the EN388 standard are as follows:

Abrasion resistance 2

Cut resistance 1

Tear resistance 2

Puncture resistance 2

Protection against chainsaw cutting should be evaluated with the following chainsaw speeds.

CLASS	SPEEDS
0	16 m/s
1	20 m/s
2	24 m/s
3	28 m/s

Classification by type

TYPE1 Protection against chainsaw cutting in both right and left hands.

TYPE2 Chain cut protection only on left hand. The right hand has no cut protection.

Design A

Only applicable for gloves with cut protection in the metacarpal area, but not on fingers or thumb.

Design B

Applicable to gloves and 3-finger mitts incorporating, in addition to design A protection, the back of the fingers (except thumb).

Main changes with previous standard:
Requirements that in EN381-7 were optional, cleaning, dexterity and water vapour permeation and absorption, become mandatory. It becomes mandatory to measure dexterity by means of a grip test essay on a bar with a pressure sensor.
Water vapour permeation is mandatory for coated gloves.In the cutting test, the changes are: Pre-treatment – cleaning according to the Manufacturer’s instructions. The number of cuts significantly increases the number of cuts and the areas. All of them are mandatory.

TYPE	DESIGN
TYPE	A	B
1	Position 1: two in left hand Position 2: two in left hand Position 3: one in right hand Position 4: two in right hand	Posición 5: two in left hand Position 6: two in left hand Position 7: one in right hand Position 8: one in right hand Position 9: one in right hand Position 10: one in lefthand
2	Posición 1: two in left hand Position 2: two in left hand	Posición 1: two in left hand Position 2: two in left hand Position 10: one in right hand

Materials

Leather

Colour

White / Orange

Thickness

0.80 mm

Length

S - 23 cm

M - 24 cm

L - 25 cm

XL - 26 cm

XXL - 27 cm

XXXL - 27 cm

Sizes

7/S

8/M

9/L

10/XL

11/XXL

12/3XL

Packaging

6 pairs/package

72 pairs/box

Characteristics

Natural goat skin provides excellent touch, flexibility and softness.
Flexible fabric panels on the areas of higher movement to enhance the tool handling.
26 layers of cut protection material inserted into the back of the left hand.
Sewn with Kevlar® thread.
Elasticated Nylon and neoprene cuffs with adjustable width closure.
Goat skin reinforcements on palm and thumb to improve protection on the main friction areas.
Double stitching all around reinforcements.
Available with recycled header card for retail (HMT160)

Working gloves suitable for:

Working with chainsaw.

Documentation

article Data sheet article Declaration of comformity

Consult a Technician

We can advise you which is the most suitable glove for your job

Consult a Technician

Glove Juba - HMT160 POWER CUT

Normative

Materials

Colour

Thickness

Length

Sizes

Packaging

Characteristics

Working gloves suitable for:

Documentation

Consult a Technician

Juba SSP

Technical Consultation